factory Outlets for Mppt Solar Charge Controllers - Solar Charge Controller MPPT MC W Series – Mutian
factory Outlets for Mppt Solar Charge Controllers - Solar Charge Controller MPPT MC W Series – Mutian Detail:
SPECIFICATION
| Model (MPPT MC-W-) | 20A | 30A | 40A | 50A | 60A | |
| Product category | Controller Properties | MPPT (maximum power point tracking) | ||||
| MPPT efficiency | ≥99.5% | |||||
| Standby power | 0.5W~1.2W | |||||
| Input Characteristics | Max.PV input voltage(VOC) | DC180V | ||||
| Start the charge voltage point | Battery voltage + 3V | |||||
| Low input voltage protection point | Battery voltage + 2V | |||||
| Over voltage protection point | DC200V | |||||
| Over voltage recovery point | DC145V | |||||
| Charge Characteristics | Selectable Battery Types | Sealed lead acid, Gel battery, Flooded | ||||
| (Default Gel battery) | (Other types of the batteries also can be defined) | |||||
| Charge rated current | 20A | 30A | 40A | 50A | 60A | |
| Temperature Compensation | -3mV/℃/2V (default) | |||||
| Display & | Display mode | High-definition LCD segment code backlight display | ||||
| Communication | Communication mode | 8-pin RJ45 port/RS485/support PC software monitoring/ | ||||
| Other Parameters | Protect function | Input-output over under voltage protection, | ||||
| Prevention of connection reverse protection,battery shedding protection etc. | ||||||
| Operation Temperature | -20℃~+50℃ | |||||
| Storage Temperature | -40℃~+75℃ | |||||
| IP(Ingress protection) | IP21 | |||||
| Noise | ≤40dB | |||||
| Altitude | 0~3000m | |||||
| Max. connection size | 20mm2 | 30mm2 | ||||
| Net Weight (kg) | 2.3 | 2.6 | ||||
| Gross Weight (kg) | 3 | 3.5 | ||||
| Product Size（mm） | 240*168*66 | 270*180*85 | ||||
| Packing Size(mm) | 289*204*101 | 324*223*135 | ||||
SPECIFICATION
| Model MLW-S | 10KW | 15KW | 20KW | 30KW | 40KW | 50KW |
| System Voltage | 96VDC | 192VDC | 384VDC | |||
| SOLAR CHARGER | ||||||
| Maximum PV Input | 10KWP | 15KWP | 20KWP | 30KWP | 40KWP | 50KWP |
| Rated Current (A) | 100A | 100A | 100A | 100A | 120A | 140A |
| AC Input | ||||||
| AC Input Voltage (Vac) | 3/N/PE, 220/240/380/400/415V Three Phase | |||||
| AC Input Frequence (Hz) | 50/60±1% | |||||
| Output | ||||||
| Rated Power (kW) | 10KW | 15KW | 20KW | 30KW | 40KW | 50KW |
| Voltage (V) | 3/N/PE, 220/240/380/400/415V Three Phase | |||||
| Frequency (Hz) | 50/60±1% | |||||
| Voltage Total Harmonic Distortion | THDU<3% (Full load, linear load ) | |||||
| THDU<5% (Full load, nonlinear load) | ||||||
| Output Voltage Regulation | <5% (Load 0~100%) | |||||
| Power Factor | 0.8 | |||||
| Overload Capacity | 105~110%, 101mins; 110~125%, 1mins; 150%, 10S | |||||
| Crest Factor | 3 | |||||
| General Data | ||||||
| Max. Efficiency | >95.0% | |||||
| Operating Temperature(°C) | –20~50 (>50°C derating） | |||||
| Relative Humidity | 0~95% (non-condensing) | |||||
| Ingress Protection | IP20 | |||||
| Max. Operating Altitude (m) | 6000 (>3000m derating) | |||||
| Display | LCD+LED | |||||
| Cooling method | Smart forced air cooling | |||||
| Protection | AC&DC over/under voltage, AC overload, AC short circuit, over temperature, etc | |||||
| EMC | EN 61000-4, EN55022(Class B), | |||||
| Safety | IEC60950 | |||||
| Dimension (D*W*H mm) | 350*700*950 | 555*750*1200 | ||||
| Weight (kg) | 75 | 82 | 103 | 181 | 205 | 230 |
FEATURES
High efficient MPPT: Multiple Power Point Trackers (MPPTs) enable the output power of solar panel array to improve the energy conversion 20% ~ 30%.
High reliability: Adopt advanced microprocessor to achieve “MPPT + SOC” dual intelligent optimized charging control to ensure the product to be stable and reliable.
Intelligent charging management: Adopt charging mode combined constant current and constant voltage to ensure effective battery charging and battery life.
High efficiency: Adopt low power consumption MOSFET and PWM soft switch and synchronous rectifier technology, effectively improving the system operating efficiency.
Intelligent: Auto-start by Illumination recognition (optional) – the system can configure auto start the load in the event of insufficient sunshine, such as fog, rain, night etc.
Protections: Overcharge / overdischarge, short circuit, overload, reverse connection, TVS lightning protection etc.
Strong environment adaptability.
Product detail pictures:
Related Product Guide:
We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable merchandise at most aggressive rates. So Profi Tools present you very best price of money and we are ready to develop alongside one another with factory Outlets for Mppt Solar Charge Controllers - Solar Charge Controller MPPT MC W Series – Mutian , The product will supply to all over the world, such as: Ghana, Atlanta, Rio de Janeiro, Based on our automatic production line, steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We have been looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest, innovative and efficient, we sincerely expect that we can be business partners to create our brilliant future!
By Debby from Gabon - 2018.11.06 10:04
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Elma from Brunei - 2017.06.29 18:55
Write your message here and send it to us
