factory Outlets for Mppt Solar Charge Controllers - Solar Charge Controller MPPT MC W Series – Mutian
factory Outlets for Mppt Solar Charge Controllers - Solar Charge Controller MPPT MC W Series – Mutian Detail:
SPECIFICATION
Model (MPPT MC-W-) | 20A | 30A | 40A | 50A | 60A | |
Product category | Controller Properties | MPPT (maximum power point tracking) | ||||
MPPT efficiency | ≥99.5% | |||||
Standby power | 0.5W~1.2W | |||||
Input Characteristics | Max.PV input voltage(VOC) | DC180V | ||||
Start the charge voltage point | Battery voltage + 3V | |||||
Low input voltage protection point | Battery voltage + 2V | |||||
Over voltage protection point | DC200V | |||||
Over voltage recovery point | DC145V | |||||
Charge Characteristics | Selectable Battery Types | Sealed lead acid, Gel battery, Flooded | ||||
(Default Gel battery) | (Other types of the batteries also can be defined) | |||||
Charge rated current | 20A | 30A | 40A | 50A | 60A | |
Temperature Compensation | -3mV/℃/2V (default) | |||||
Display & | Display mode | High-definition LCD segment code backlight display | ||||
Communication | Communication mode | 8-pin RJ45 port/RS485/support PC software monitoring/ | ||||
Other Parameters | Protect function | Input-output over under voltage protection, | ||||
Prevention of connection reverse protection,battery shedding protection etc. | ||||||
Operation Temperature | -20℃~+50℃ | |||||
Storage Temperature | -40℃~+75℃ | |||||
IP(Ingress protection) | IP21 | |||||
Noise | ≤40dB | |||||
Altitude | 0~3000m | |||||
Max. connection size | 20mm2 | 30mm2 | ||||
Net Weight (kg) | 2.3 | 2.6 | ||||
Gross Weight (kg) | 3 | 3.5 | ||||
Product Size(mm) | 240*168*66 | 270*180*85 | ||||
Packing Size(mm) | 289*204*101 | 324*223*135 |
SPECIFICATION
Model MLW-S | 10KW | 15KW | 20KW | 30KW | 40KW | 50KW |
System Voltage | 96VDC | 192VDC | 384VDC | |||
SOLAR CHARGER | ||||||
Maximum PV Input | 10KWP | 15KWP | 20KWP | 30KWP | 40KWP | 50KWP |
Rated Current (A) | 100A | 100A | 100A | 100A | 120A | 140A |
AC Input | ||||||
AC Input Voltage (Vac) | 3/N/PE, 220/240/380/400/415V Three Phase | |||||
AC Input Frequence (Hz) | 50/60±1% | |||||
Output | ||||||
Rated Power (kW) | 10KW | 15KW | 20KW | 30KW | 40KW | 50KW |
Voltage (V) | 3/N/PE, 220/240/380/400/415V Three Phase | |||||
Frequency (Hz) | 50/60±1% | |||||
Voltage Total Harmonic Distortion | THDU<3% (Full load, linear load ) | |||||
THDU<5% (Full load, nonlinear load) | ||||||
Output Voltage Regulation | <5% (Load 0~100%) | |||||
Power Factor | 0.8 | |||||
Overload Capacity | 105~110%, 101mins; 110~125%, 1mins; 150%, 10S | |||||
Crest Factor | 3 | |||||
General Data | ||||||
Max. Efficiency | >95.0% | |||||
Operating Temperature(°C) | –20~50 (>50°C derating) | |||||
Relative Humidity | 0~95% (non-condensing) | |||||
Ingress Protection | IP20 | |||||
Max. Operating Altitude (m) | 6000 (>3000m derating) | |||||
Display | LCD+LED | |||||
Cooling method | Smart forced air cooling | |||||
Protection | AC&DC over/under voltage, AC overload, AC short circuit, over temperature, etc | |||||
EMC | EN 61000-4, EN55022(Class B), | |||||
Safety | IEC60950 | |||||
Dimension (D*W*H mm) | 350*700*950 | 555*750*1200 | ||||
Weight (kg) | 75 | 82 | 103 | 181 | 205 | 230 |
FEATURES
High efficient MPPT: Multiple Power Point Trackers (MPPTs) enable the output power of solar panel array to improve the energy conversion 20% ~ 30%.
High reliability: Adopt advanced microprocessor to achieve “MPPT + SOC” dual intelligent optimized charging control to ensure the product to be stable and reliable.
Intelligent charging management: Adopt charging mode combined constant current and constant voltage to ensure effective battery charging and battery life.
High efficiency: Adopt low power consumption MOSFET and PWM soft switch and synchronous rectifier technology, effectively improving the system operating efficiency.
Intelligent: Auto-start by Illumination recognition (optional) – the system can configure auto start the load in the event of insufficient sunshine, such as fog, rain, night etc.
Protections: Overcharge / overdischarge, short circuit, overload, reverse connection, TVS lightning protection etc.
Strong environment adaptability.
Product detail pictures:
Related Product Guide:
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for factory Outlets for Mppt Solar Charge Controllers - Solar Charge Controller MPPT MC W Series – Mutian , The product will supply to all over the world, such as: Malawi, Nepal, Bandung, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
By Marguerite from Sri Lanka - 2017.03.07 13:42
It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
By Meredith from Bolivia - 2017.05.02 18:28